Industrial Radiography is a Non Destructive Testing method that involves passing a beam of radiation from an object to a radiographic film. This method enables discontinuities present within the object to be observed on the radiographic film. The following related techniques are readily available from SCI:
SCI has the following equipment for industrial radiography:
At most of its premises SCI has bunkers for X-ray and there is always the possibility of installing modular bunkers on a customer’s own site.
RADIOGRAPHY WITH LINAC
Since late 2009, SCI has had a 6 MeV linear accelerator at its facilities in Beasain (Guipúzcoa), exclusively for radiographic inspection of large components, SCI is the the leading Spanish company specialising in radiographing steel thicknesses of up to 300 mm in a bunker and has earned a global reputation as demand for such services in the metallurgical sector continues to grow.
Digital radiography is an alternative to conventional radiography in which the film is replaced by a capture system whose reading provides a digitized radiographic image.
Digital radiography has major advantages over conventional radiography, the most noteworthy of which are:
There are two radiographic image capture systems:
SCI markets both the DR and CR systems, enabling us to provide a better service and guidance in accordance with clients´ needs.
The fields of application of digital radiography are basically the same as those of conventional radiography, although the use of specific software for the analysis of images means new applications can be used in this testing method. The most noteworthy of these new applications are:
Complementing the use of conventional radiography, digital radiography is an innovation in the conservation of radiographic film and a solution to archiving problems. The digitization of radiographic scanner plates results in a very high resolution and a quality of scanned images similar to those of conventional film.
Digital images obtained can be treated and used in a similar way to conventional radiographs.
With the introduction of crawler type computers in Spain, automated radiographic gas and pipeline inspection has been greatly improved, allowing the examination of a large number of welds in less time and to a much greater accuracy.
SCI designs and manufactures its own crawler equipment, suitable for diameters from 3″ to 60″. SCI has been a market leader in Spain for the inspection of oil and gas pipelines while under construction and has now greatly extended these service worldwide.